Page 1 of 11 12345 ... LastLast
Results 1 to 10 of 107

Thread: iATKOS ML2 (Mac OS X Mountain Lion 10.8.2) [LOCAL LINK]
http://idws.in/381123

  1. #1

    Join Date
    Apr 2008
    Location
    beyond d clouds
    Posts
    1,068
    Thank(s)
    1,125/194,494
    Blog Entries
    2
    Rep Power
    8

    Default iATKOS ML2 (Mac OS X Mountain Lion 10.8.2) [LOCAL LINK]




    Instructions for the dmg image file:
    OS X:
    DVD/Blu-Ray: Burn the dmg image to a blank Dual Layer DVD (R, RW) or Blu-Ray Disk (BD-R, BD-RE) using Disk Utility on OS X and then you are ready to boot with the disk and install OS X to your computer.

    USB HDD/Stick: Restore the dmg image to a USB HDD/Stick using OS X Disk Utility and install the chameleon bootloader to the USB target using this pkg file. Then you can boot with the USB device and install OS X to your computer.

    Windows:
    DVD/Blu-Ray: Windows users can burn iATKOS ML2 dmg image file to a Dual Layer DVD (R, RW) or Blu-Ray Disk (BD-R, BD-RE) using Transmac.

    Linux:
    - Linux users will sure find the way to burn it to dvd/blu-ray or restore it to USB media

    Attention:
    Show Attention

    >>>> What is OSX86? <<<<

    >>>> What is iATKOS? <<<<

    1- a) This is an OSX86 installer and this is designed for Non-Apple X86_64 Intel CPU computers.
    b) This installer includes Apple's Mac OS X Mountain Lion 10.8.2 (Build 12C54).
    c) You do not need any other OS X system on your target computer to install OS X Mountain Lion. You only need iATKOS ML2 dmg file burned to a Dual Layer DVD/Blu-Ray or restored on a USB media.


    2- Requirements and Support List:

    Requirements: Compatible motherboard, Intel Core2Duo and newer 64bit CPU, minimum 1GB RAM, minimum 15GB free space on target partition, compatible VGA card.

    Check your hardware details and do the comparing with the hardware support list below.

    >>> Hardware Compatibility Information of iATKOS ML2 <<<

    You may also visit Wiki HCL pages and other OSX86 platforms for more support.

    You will want to know about the details of your computer before attempting to install this system.

    To get your hardware details (Vendor IDs, Device IDs), you can

    - Fire up a Linux Live CD and boot from it (ie. Parted Magic, Ubuntu Live CD). Type "lspci -nn" in terminal, press enter and take notes.
    - Boot from iATKOS ML2 media, open terminal, type "lspci -nn", press enter and take notes.
    - Get/install Everest Ultimate Edition on Windows and use it to export the information.

    Mostly, compatibility of a hardware can be defined by its chipset and device id, but this is not a rule. Motherboards/VGA cards/other computers parts with same chipsets and device ids of different brands may have differences that can result with incompatibility.
    Therefore > Search, read and try it on your computer before asking like "Will this hardware/computer work with iATKOS ML2?".
    Simply, if a hardware is absolutely not compatible for OSX86 10.8.2 (i.e. Broadcom BCM4313, Atheros AR5007, etc.), then it is also not compatible for iATKOS ML2.

    3-
    Check the md5 of the iATKOS dmg file that you downloaded and make sure that the md5 checksum matches the one posted on our website. If not, then you have a faulty dmg image file.

    4-
    Read the instalation steps carefully and if something goes wrong, don't panic. Scroll down to the troubleshooting guide. Make sure you have read/applied the steps of troubleshooting guide before posting in the forum!


    Information:
    Show Information

    - 64-bit/32-bit thing:
    Mac OS X Mountain Lion is a 64-bit operating system which means that it can only boot in 64-bit mode.
    32-bit applications will work but loading a 32-bit compiled driver/module/kext is not possible for Mountain Lion. Therefore applications that need their own 32bit-only modules (kexts) may partially or totally fail.

    - You can make clean, upgrade and refresh installs to your existing OSX86 system using iATKOS ML2. Please read the related section.

    - Easy installation on Software RAID volumes. No additional user actions needed. Please read the related section.

    - nvidia graphics cards will have less problems with OS X 10.8 using iATKOS ML2 because of the automated id injection.

    - Network devices will be auto-detected.

    - Onboard sound devices will be auto-detected. Thanks to Andy Vandijck and Voodoo team.

    - Using software updater to apply main system updates just like real Macs on most computers is possible using iATKOS ML2. Please read the related section.

    - This installer may not include all the necessary drivers required by your setup. Additional steps may be needed to be taken by the user to setup and use such components.

    - Main system is fully stock. We are running iATKOS main system on our real Macs!

    - Intro track > "Flu - Şarj-ı Deşarj"

    - German translation by @stahlgewitter.

    - Hebrew translation by @רומן חורול (Roman Horol).

    - French translation by @julianbougnon.


    Before Installation:
    Show Before Installation

    - BIOS settings:
    - Set your BIOS to its default settings.
    - Execute Disable bit: Enabled
    - XD (if exists): Enabled
    - Limit CPUID Max: Disabled
    - Set all cores of the CPU active/enabled.
    - Virtualization (if exists): Enabled or Disabled, try it.
    - Hyper-threading: Enabled or Disabled, try it.
    - HPET (High Precision Event Timer/PCH): Enabled
    - SATA Mode: AHCI
    - Set all the Overclock/Performance/Turbo etc. values to Auto.
    - Set the UEFI mode settings (if exists) to compatible mode


    - Preparing a Target for installation:
    Show Preparing a Target for installation

    - A target partition or disk will be needed for installation.

    - If you are not an advanced user, I advice you to use a clean harddisk with no personal data/OS as for target and unplug all the other harddisk drives connected to your motherboard just to be safe.

    - If you are not an advanced user and if your target disk includes personal data and/or any OS, I advice you to backup your data before anything.

    - Parted Magic or OS X Disk Utility can be used for partitioning and such operations for preparing a target.

    - Use Parted Magic if you are not an advanced user.

    -Parted Magic: Parted Magic is a Linux Live OS project for harddrive operations. Download the iso image from >> http://partedmagic.com << Burn it to a CD/DVD with any suitable application and boot your computer with it. Run the partition editor application and create your target.

    -OS X Disk Utility: Boot iATKOS ML2, choose the language, run Disk Utility via Utilities menu and create your target.

    Create your target partition formatted as HFS+ (Mac OS Extended (Journaled)).

    -Partition Type: You can choose MBR (Master Boot Record/msdos) or GPT (Guid Partition Table) for your target harddisk via partitioning options.
    If you don't need/want to change your existing partition table type, just do not touch it. If you want to change it, note that all your existing data on target harddisk will be gone.
    GPT:
    Advantages:
    -You can add/remove partitions and change the size of them on a GPT partitioned drive without repartitioning and you can even do it on-the-fly on a running OS X system partition.
    -You can create up to 128 bootable partitions on a GPT partitioned drive.
    -You can use Software RAID only on GPT partitioned drives for OS X.
    Disadvantages:
    -Multiboot is not so easy to manipulate for newbies.
    MBR:
    Advantages:
    -Pretty easy to manipulate multiboot
    Disadvantages:
    -Partitioning operations with OS X Disk Utility need recreationing of the whole partition table.
    -No Software RAID for OS X
    -2TB partition size limit
    -You can have max 4 bootable partitions (4 primary partitions) for OS X. You can only boot the OS X installations on the rest of the partitions (logical partitions when more than 5) over first 3 primary partitions.

    - I advice MBR for your target harddisk if your are not an advanced user.
    The target should be a Primary Partition for MBR partitioned harddisks.


    Starting the Installation:
    Show Starting the Installation

    - Boot your computer from iATKOS ML2 media (Dual Layer DVD, Blu-Ray or USB Media)

    Most OSX86 compatible computers will be able to boot iATKOS ML2 media by default (without entering commands), but some computers will need some boot flag(s)/command(s) to be entered at boot promt.

    If you are booting from DVD/Blu-Ray, then you need to press F8 in first 10 seconds for boot promt.

    Common boot flags/commands for iATKOS ML2 install media:

    - You can enter without quotes (").
    - You can try combinations by adding a space between them, i.e. "-v cpus=1".


    "GraphicsEnabler=Yes" This is needed for Intel HD 4000 installation.

    "cpus=1" This may be needed for some 2011 socket motherboards and some laptop computers. TSC Sync should be selected for those 2011 socket motherboards during install. Kernel Patcher should be selected for those problematic laptop computers.

    "UseKernelCache=No" This command is needed for computers that freeze at any point (including "PCI Configuration Begin" line) or computers that act weird this can be a CMOS reset or ignoring other SATA ports issue.
    By entering this command, ElliottRTC.kext and modified IOPCIFamily.kext will be loaded during install.

    "-v" Verbose mode.

    "-x" Safe mode.

    "USBBusFix=Yes" This option is to fix USB related issues of some motherboards that can cause freeze or USB ports to fail.

    "npci=0x3000" Computers that freeze on "[ PCI Configuration Begin ]" line may try this command.

    "ATIConfig=xx" "xx" is the ATI framebuffer name for target model (search it on google). This may be needed for some Intel HD 4000 + ATI gpu computers to boot with "GraphicsEnabler=Yes" command.
    If you used this command to boot iATKOS ML2 media, then you will also need to use it to boot your ML2 system.

    - Select the language


    Clean Installation:
    Show Clean Installation


    1- Run Disk Utility via Utilities menu and erase the target for clean install

    2- Select the destination for installation

    3- Click Customize* and select what you need

    4- Click Install


    Upgrade from previous versions:
    Show Upgrade from previous versions

    - You can upgrade your existing Lion (10.7.x) and Mountain Lion (10.8.x) installations to Mountain Lion 10.8.2 or make a refresh install to your problematic 10.8.2 system (keeping your applications, user accounts, user settings and user data) by using iATKOS ML2.

    To upgrade from Snow Leopard (10.6.x), you should first upgrade to Lion (10.7.x) by using iATKOS L2 or any other methods.

    - I advice you to try a clean install to another hdd on your computer before upgrade, to see that if it actually works on your computer or not and to determine your install selection list.

    - You will need to re-install your special device drivers after upgrade. i.e. your m-audio firewire sound driver, your 3G modem driver, your ATI video card driver..

    - Some of your applications that runs on the previous versions of OS X may not be compatible with Mountain Lion 10.8.2, so know that they may fail after upgrade.
    Search for your existing software/driver compatibility for Mountain Lion before upgrading to Mountain Lion.


    1- Select the destination for upgrade installation

    2- Click Customize* and select what you need

    3- Click Install

    DOWNLOAD LINKS:

    You must click 'Thank You' before you can see the data contained here.
    You do not have sufficient rights to see the hidden data contained here.


    You must click 'Thank You' before you can see the data contained here.
    You do not have sufficient rights to see the hidden data contained here.


    #MIRROR#
    You must click 'Thank You' before you can see the data contained here.
    You do not have sufficient rights to see the hidden data contained here.


    You must click 'Thank You' before you can see the data contained here.
    You do not have sufficient rights to see the hidden data contained here.


    Last edited by ain_gt; 04-02-2013 at 01:12 PM. Reason: added mediafire mirror :)
    Reply With Quote Reply With Quote

  2. Who Said Thanks:

    There are too many to display.

  3. #2

    Join Date
    Jun 2010
    Location
    F*CK
    Posts
    46
    Thank(s)
    2/37
    Blog Entries
    4
    Rep Power
    0

    Default

    downloadnya gmna ni om??
    gk ada idws nya om>?
    Reply With Quote Reply With Quote

  4. Who Said Thanks:


  5. #3

    Join Date
    Apr 2008
    Location
    beyond d clouds
    Posts
    1,068
    Thank(s)
    2/194,494
    Blog Entries
    2
    Rep Power
    8

    Default

    idws lg maintenis, bro
    donlot dari amshare kenceng banget, cm kudu register dL, free kok
    Reply With Quote Reply With Quote

  6. Who Said Thanks:


  7. #4

    Join Date
    Jan 2010
    Location
    Jakbar
    Posts
    141
    Thank(s)
    63/344
    Rep Power
    0

    Default

    Quote Originally Posted by ain_gt View Post



    Instructions for the dmg image file:



    Attention:
    Show Attention




    Information:
    Show Information




    Before Installation:
    Show Before Installation




    - Preparing a Target for installation:
    Show Preparing a Target for installation




    Starting the Installation:
    Show Starting the Installation




    Clean Installation:
    Show Clean Installation




    Upgrade from previous versions:
    Show Upgrade from previous versions



    DOWNLOAD LINKS:

    *** hidden content ***
    part 10nya mana gan
    Reply With Quote Reply With Quote

  8. Who Said Thanks:

    There are too many to display.

  9. #5

    Join Date
    Sep 2009
    Location
    Pandeglang
    Posts
    678
    Thank(s)
    2/18,844
    Blog Entries
    2
    Rep Power
    6

    Default

    Quote Originally Posted by ain_gt View Post
    idws lg maintenis, bro
    donlot dari amshare kenceng banget, cm kudu register dL, free kok
    iya nih maentenis
    punya link laen kk
    Reply With Quote Reply With Quote

  10. Who Said Thanks:


  11. #6

    Join Date
    Jun 2011
    Location
    jember
    Posts
    185
    Thank(s)
    1/146
    Rep Power
    0

    Default

    uda ada yg coba donlod ini??
    thx buat linknya bro, oh y sekedar info ane pake retail 10.8 di acer 4752G bisa !
    Reply With Quote Reply With Quote

  12. Who Said Thanks:


  13. #7

    Join Date
    Jun 2009
    Location
    Jakarta
    Posts
    118
    Thank(s)
    0/47
    Rep Power
    0

    Default

    cara ML2 booting dari USB via Windows OS gimana ya bro?? (kl dari MAC banyak caranya, dari windows ane blm nemu)
    Reply With Quote Reply With Quote

  14. #8

    Join Date
    Feb 2009
    Location
    earth
    Posts
    101
    Thank(s)
    1/14
    Rep Power
    0

    Default

    iATKOS_ML2.part01.rar - 476.8 MB
    iATKOS_ML2.part02.rar - 476.8 MB
    iATKOS_ML2.part03.rar - 476.8 MB
    iATKOS_ML2.part04.rar - 476.8 MB
    iATKOS_ML2.part05.rar - 476.8 MB
    iATKOS_ML2.part06.rar - 476.8 MB
    iATKOS_ML2.part07.rar - 476.8 MB
    iATKOS_ML2.part08.rar - 476.8 MB
    iATKOS_ML2.part09.rar - 476.8 MB
    iATKOS_ML2.part11.rar - 243.9 MB
    btw part 10nya bwlum ada ya
    Reply With Quote Reply With Quote

  15. Who Said Thanks:


  16. #9

    Join Date
    Jun 2011
    Location
    jember
    Posts
    185
    Thank(s)
    0/146
    Rep Power
    0

    Default

    Quote Originally Posted by nobita_anak_metal View Post
    cara ML2 booting dari USB via Windows OS gimana ya bro?? (kl dari MAC banyak caranya, dari windows ane blm nemu)
    setau ane beli aja dvd dual layer donlod program namanya transmac, burn pake program itu da sls

    ane coba waktu pake L2
    Reply With Quote Reply With Quote

  17. #10

    Join Date
    Jun 2010
    Location
    F*CK
    Posts
    46
    Thank(s)
    1/37
    Blog Entries
    4
    Rep Power
    0

    Default

    Quote Originally Posted by ain_gt View Post
    idws lg maintenis, bro
    donlot dari amshare kenceng banget, cm kudu register dL, free kok
    ane coba dlu bro..
    btw part 10 kok gak ada ya bro?
    Reply With Quote Reply With Quote

  18. Who Said Thanks:


Page 1 of 11 12345 ... LastLast

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Indowebster is proudly powered by PT. Gudang Data Indonesia